Instructions and precautions for installation and use of LED cup light.
LED cup light is a kind of indispensable lighting lamps and lanterns when household decorates, it can be installed in the place such as kitchen, toilet, corridor, sitting room, it is environmental protection, efficient new generation saves energy healthy lamps and lanterns.
LED cup installation is very convenient and simple, but if installed in a special material and environment, there are still some places to pay attention to, CPL will tell you about the installation of LED cup safety precautions.
1. LED lamp cup shall not be directly installed on combustible objects. Some families are beautiful, with the backside that the 3 plywood lining after paint is in day flower lamp, this is very dangerous actually, must take adiabatic measure; If place of high temperature of lamps and lanterns surface is close to combustible when, also want to take adiabatic or come loose heat measure.
2. The connection between the LED cup lead and the lamp holder, and the parallel lead between the lamp holder should be firm, and the electrical contact should be good, so as to avoid the risk of sparks between the lead and the terminal due to poor contact.
3. Before the installation of LED lamp cup, please also check the cross section of the lead wire core leading to each lamp, the copper core flexible wire shall not be less than 0.4mm2, and the copper core shall not be less than 0.5mm2, otherwise the lead wire shall be replaced.